1.MM32G0141C4PV

The MM32G0141C4PV is a microcontroller with an Arm® Cortex®-M0 core that operates at up to 72MHz. The MM32G0141C4PV has 64KB of high-speed memory and a rich set of I/O ports and peripheral modules. The MM32G0141C4PV includes a 12-bit ADC, a comparator, a 16-bit advanced timer, a 16-bit and a 32-bit general-purpose timer, three 16-bit basic timers, and standard communication interfaces: three UART interfaces, one I2C interface, and two SPI or I2S interfaces. In addition, the MM32G0141C4PV has a variety of built-in power-saving operating modes to ensure the requirements of low-power applications.

Main applications: industrial control, digital power supply, new energy photovoltaic, motor control, computer accessories, smart home

2.BTA16-800BRG

ST‘s BTA16-800BRG is a triac available in either through-hole or surface-mount packages for general-purpose power AC switching.The BTA16-800BRG can be used as an ON/OFF function in applications such as static relays, heating regulation or induction motor start circuits. It is also recommended for phase control operation in dimmers and electrical motor speed controllers.

Main applications: ON/OFF or phase angle functions in applications such as induction loads, static relays, dimmers, and electrical motor speed controllers

3.TDA5235XUMA1

Infineon TDA5235XUMA1 is a low power ASK/FSK receiver for the 300-320, 425-450863-870 and 902-928 MHz bands.The TDA5235XUMA1 features dual phase modulation schemes such as Manchester, dual phase tagging, support for dual phase space and differential Manchester. And the chip offers best-in-class sensitivity performance at a very high level of integration, requiring only a few external components. In addition, the device meets automotive quality standards and operates between -40 and +105°C over a supply voltage range of 3.0-3.6 volts or 4.5-5.5 volts.

Main applications: remote keyless entry systems, remote start applications, tire pressure monitoring, short-range radio data transmission, remote control units, cordless alarm systems, remote metering

4.LM5109BQNGTTQ1

The Texas Instruments LM5109BQNGTTQ1 is a cost-effective high-voltage gate driver designed to drive high-side and low-side N-channel MOSFETs in synchronous buck or half-bridge configurations.The LM5109BQNGTTQ1 is capable of operating at rail voltages up to 90 V, with outputs independently controlled by TTL/CMOS-compatible logic input thresholds. Also, low power consumption is used to provide level conversion from the control input logic to the high-side gate driver.

Main applications: push-pull converters, half-bridge and full-bridge power converters, solid-state motor drivers, dual-switch forward power converters

5.SAF-XE164F-96F66L AC

The Infineon SAF-XE164F-96F66L AC is a real-time signal controller that is part of the Infineon XE166 family of full-featured monolithic CMOS microcontrollers.The SAF-XE164F-96F66L AC extends the functionality and performance of the C166 family in terms of instructions (MAC unit), peripherals and speed.The SAF- XE164F-96F66L AC combines high CPU performance (up to 80 million instructions per second) with extended peripheral functionality and enhanced IO capabilities, and optimized peripherals that can be flexibly adjusted to meet application requirements.

Key Applications: Automotive Design

6. MAX2839ETN+

The ADENO MAX2839ETN+ is an RF transceiver designed for 2GHz 802.16e MIMO mobile WiMAX systems.The MAX2839ETN+ contains one transmitter and two receivers with >40dB of isolation between each receiver.The MAX2839ETN+ fully integrates all the circuitry required to implement RF transceiver functionality, providing RF-to-baseband receive path, baseband-to-RF transmit path, VCO, frequency synthesizer, crystal oscillator, and baseband/control interface. The transceiver IC also integrates circuitry for on-chip DC offset cancellation, I/Q error, and carrier leakage detection circuitry.

Key applications: 802.16e mobile WiMAX™ systems, Korean WIBRO systems, proprietary wireless broadband systems, 802.11g or n WLAN with MRC or MIMO downlink

7. STM32F217VET6

The STMicroelectronics STM32F217VET6 is a high-performance ARM®-based 32-bit MCU operating at up to 120 MHz.The STM32F217VET6 includes high-speed embedded memory (up to 1M bytes of Flash, up to 128K bytes of system SRAM), up to 4K bytes of backup SRAM, and connections to two APB buses, three AHB buses, and a 32-bit WLAN, The STM32F217VET6 also features an Adaptive Real-Time Memory Accelerator (ART Accelerator™), which allows performance equivalent to executing a 0-wait-state program from flash memory at CPU frequencies up to 120 MHz.

Main applications: Aerospace, automotive, robotics, and other high technology fields

8.UCC2808AQDR-1Q1

The Texas Instruments UCC2808AQDR-1Q1 series BiCMOS push-pull, high-speed, low-power pulse width modulator. is arranged in a push-pull configuration, and both outputs are switched at half the oscillator frequency using a trigger flip-flop. The dead time between the two outputs is typically 60ns to 200ns, depending on the value of the timing capacitor and resistor, thus limiting the duty cycle of each output stage to less than 50%.

Key applications: UVLO threshold and hysteresis options for offline and battery-powered systems

9. MK10DX256VLH7R

The NXP Semiconductors MK10DX256VLH7R is a 72MHz Cortex-M4-based high-performance microcontroller with 288KB of flash and 64KB of SRAM in a 64-LQFP package.

Main applications: Automotive design

10.LP2998MR/NOPB

Texas Instruments LP2998MR/NOPB is a linear regulator designed to meet JEDEC SSTL-2 and JEDEC SSTL-18 specifications and is used for DDR-SDRAM and DDR2 memory termination. VDDQ min. is 1.35 V. In addition, LP2998MR/NOPB contains a high-speed op-amp to provide excellent response to load transients. LP2998MR/NOPB also contains a VSENSE pin to provide excellent load regulation and VREF output as a reference for chipsets and DIMMs.

Main applications: DDR1, DDR2, DDR3 and DDR3L terminal voltages, automotive infotainment, FPGA, industrial/medical PC, SSTL-18, SSTL-2 and SSTL-3 terminals, HSTL terminals