1.BQ24715RGRR

The Texas Instruments BQ24715RGRR is an NVDC-1 synchronous battery charge controller with low quiescent current and high light-load efficiency for 2S or 3S Li-ion battery charging applications. Power path management allows the system to regulate at the battery voltage without dropping below the programmable system minimum voltage. And the BQ24715RGRR provides not only N-channel ACFET and RBFET drivers for power path management, but also drivers for external P-channel battery FETs.

Main applications: Ultrabook, notebook and tablet PC, industrial and medical equipment, portable devices

2.NCP59301DS50R4G

The ON Semiconductor NCP59301DS50R4G is a high precision, very low dropout voltage (VLDO), low ground current positive voltage regulator currently available in the D2PAK-5 package, with future plans for the D2PAK-3 package. In addition, the NCP59301DS50R4G consists of a fixed-voltage version and can withstand input voltages up to 18 V. The NCP59301DS50R4G is capable of delivering more than 3.0 A of output current at 3.0 A load current with a typical voltage drop below 300 mV.

Key applications: consumer and industrial equipment supervisory points, servers and networking equipment, FPGA, DSP and logic power supplies, post-switching power supply supervision, battery chargers, functional replacement for industry standard MIC29300, MIC39300, MIC37300 fixed voltage devices

3.L6699DTR

ST‘s L6699DTR is an enhanced high-voltage resonant controller dedicated to series resonant half-bridge topologies, supporting both LLC and LCC configurations. the L6699DTR provides symmetrical complementary duty cycle (high-side switch and low-side switch drive ON/OFF in exactly the same time heterodyne 180°) and the output voltage regulation is obtained by modulating the operating frequency.

Main applications: SMPS for LCD TVs, desktop and AIO PCs, servers, telecom power supplies, AC-DC adapters, open frame SMPS

4.MSP430FR5962IRGZR

The Texas Instruments MSP430FR5962IRGZR is a mixed-signal microcontroller that takes low power consumption and performance to new levels with a unique low-energy gas pedal (LEA) for digital signal processing. The gas pedal provides 40 times the performance of the Arm® Cortex®-M0+ MCU and assists developers in efficiently processing data using complex functions such as FFT, finite impulse response (FIR) and matrix multiplication. DSP libraries are also provided free of charge and can be implemented without the need to call on DSP experts. In addition, the devices feature up to 256KB of FRAM unified standard memory, providing more space for advanced applications and greater flexibility for implementing wireless firmware updates.

Key applications: grid infrastructure, plant automation and control, building automation, portable medical and fitness devices, wearable electronics

5.AT90USB1286-MU

The American Microchip AT90USB1286-MU is a low-power CMOS 8-bit microcontroller based on the Atmel AVR enhanced RISC architecture. By executing power instructions IP single clock cycle, the AT90USB1286-MU achieves a throughput close to 1 MIPS per MHz, allocated to the system designer to optimize power consumption and processing speed.

Main applications: Embedded control applications

6.FS32K148UAT0VMHT

The NXP Semiconductors FS32K148UAT0VMHT is an ARM® Cortex®-M4F S32K microcontroller IC in a 100-pin MAPBGA package and supports frequencies up to 112 MHz (HSRUN mode) and high-speed operation modes with operating temperatures from -40°C to 150°C in operation mode.

Main applications: Automotive and industrial applications

7.TPT29548-TS5R

The Siremp TPT29548-TS5R is an 8-channel bidirectional switching I2C switch. the SCL/SDA upstream pair fans out to eight downstream channels, with a programmable control register determining the selection of a single SCn/SDn channel or a combination of channels.

Key applications: servers/storage, routers (telecom switching equipment), factory automation, I2C from products with conflicting addresses (e.g., multiple identical temperature sensors)

8. rnx025100mfkel

The Vishay RNX025100MFKEL is an axial housing package, 8 kV high voltage metal oxide resistor with ±200 ppm/°C standard low TCR, available with special tolerances and/or temperature coefficient matching and flame retardant coating, high voltage, safety, etc.

Main applications: Power automation control equipment

9.BTS432E2BKSA1

The Infineon BTS432E2BKSA1 is an intelligent high-end power switch featuring N-channel vertical power FETs, with charge pump, ground-referenced CMOS-compatible inputs and diagnostic feedback and integrated on-chip technology in an intelligent SIPMOS with protection features.

Key applications: for 12 V and 24 V DC grounded loads, all types of resistive, inductive and capacitive loads, replacement electromechanical relays and discrete circuits

10. AT89C51RC2-RLTUM

The AT89C51RC2-RLTUM is an 8-bit microcontroller with 16K/32K bytes of Flash memory that retains all the features of the 80C52 with 256 bytes of internal RAM, a 9-source, 4-stage interrupt controller, and three timers/counters. In addition, the AT89C51RC2-RLTUM features a programmable counter array, 1024 bytes of XRAM, a hardware watchdog timer, a keyboard interface, an SPI interface, a more general serial channel (for easy multi-processor communication) and a speed-up mechanism (X2 mode).

Main applications: For applications requiring pulse-width modulation, high-speed I/O and counting functions, such as alarms, motor control, wired telephones and smart card readers