1.ADS124S08IRHBR

The Texas Instruments ADS124S08IRHBR is a low-power, low-noise, highly integrated 24-bit delta-sigma analog-to-digital converter (ADC) with PGA and voltage reference in an ultra-thin quadrilateral flat leadless (VQFN)-32 package. The combination of low power consumption and multiple integration features enables it to reduce system cost and component count in small sensor signal measurement applications.

Key applications: high-efficiency preconditioners for linear regulators, positive-to-negative converter sensors and transmitters, analog input modules for programmable logic controllers (PLCs) and distributed control systems (DCS), temperature controllers, artificial climate chambers, industrial ovens

2. MAX809REUR+T

The ADENO MAX809REUR+T is a 3-pin microprocessor reset circuit for monitoring the microprocessor (μP) monitoring circuit for power supplies in μP and digital systems. By eliminating external components, the MAX809REUR+T provides superior circuit reliability and low cost and tuning for use with +5V, +3.3V, +3.0V, or +2.5V supply circuits.

Key applications: computers, controllers, smart instruments, critical μP and μC power monitoring, portable/battery-powered devices, automotive

3.FFH30S60STU

The ON Semiconductor FFH30S60STU is a 30 A, 600 V rectifier with soft recovery characteristics.The FFH30S60STU is a silicon nitride passivated ion implant epitaxial planar structure and the FFH30S60STU is commonly used as a continuity for step-up diodes in switching power supplies and other power switching applications. In addition, its low stored charge and ultra-fast soft recovery minimize ringing and electrical noise in many power switching circuits, thereby reducing power losses in switching transistors.

Main applications: general purpose, switching power supplies, boost diodes in continuous mode power factor correction, power switching circuits

4. la cn5m-gaha-24-1-140-r18-z

Ahmers Osram LA CN5M-GAHA-24-1-140-R18-Z is a 617 nm wavelength SMD amber lighting LED that is lead-free and RoHS compliant.

Main applications: LCD backlighting, camera flash/strobe, interior lighting (e.g. dashboard backlighting), exterior lighting, backlighting (illuminated advertising, general lighting), reading lights (airplanes, cars, buses), replacement for miniature incandescent lamps, display backlighting requiring high brightness such as TFT, decorative and entertainment lighting, signaling, and symbols for directional, marking lights (e.g. steps, exits, etc.) Lamps

5.LMX4281DQEXNCS

Renesas Electronics LMX4281DQEXNCS is a 2.4 GHz radio transceiver IC with FAD control and voice with DECT, and is often used in radio broadcasting.

Main applications: Radio broadcasting

6.TS922IDT

ST‘s TS922IDT is a rail-to-rail dual BiCMOS op-amp. The TS922IDT has high output current and can drive low load impedance. The very low noise, low distortion, low offset and high output current capability make these devices an excellent choice for high quality, low voltage or battery powered audio systems. In addition, the TS922IDT is stable under capacitive loads of up to 500 pF.

Key applications: line drivers and actuator drivers, portable speakers, instrumentation where low noise is a key factor, multimedia systems, and portable devices

7.BAT6302VH6327XTSA1

The Infineon BSS131H6327XTSA1 is a 240V, 100mA N communication SIPMOS® small signal transistor in a SOT-23-3 package. It has features such as enhancement mode, logic level and RoHS compliance and is AEC Q101 qualified.

Main applications: Electronic switches, amplifiers, etc.

8.MOC3021SR2M

The ON Semiconductor MOC3021SR2M is an optically isolated triac driver. The device contains a GaAs infrared emitting diode and an optically activated silicon bidirectional switch that functions similarly to a triac switch.The MOC3021SR2M is designed to interface between electronic controls and power triac switches to control resistive and inductive loads for 115 VAC operation.

Major applications: industrial controls, solenoid valve/valve controls, traffic lights, static AC power switches, vending machines, incandescent dimmers, solid state relays, motor controls, lamp ballasts

9.IRFI4227PBF

The Infineon IRFI4227PBF is an N-channel MOSFET.This HEXFET® power MOSFET is designed for Sustain. The IRFI4227PBF utilizes the latest processing technology to achieve low on-resistance and low EPULSE rating per silicon area, with the added features of 150°C operating junction temperature and high repetitive peak current capability. These features combine to make the IRFI4227PBF an efficient, robust and reliable device for PDP driver applications.

Key Applications: Energy recovery and pass-through switching applications in plasma display panels

10.STP90NF03L

ST‘s STP90NF03L is an N-channel low-gate charge power MOSFET in a TO-220 package, in STMicroelectronics‘ unique third-generation "Single Feature Size"™" strip process. The STP90NF03L offers the best performance in terms of both conduction and switching losses when used as the high side and low side of a buck regulator. This is important for motherboards where fast switching and high efficiency are critical.

Main applications: Application switching